Search:

I did try it with the original BIOS which was the same version 0F0F but it did not work. When the white list was removed they must not have changed the version number. I did have to download and...

All installed and working great. Thanks for the heads up on the card mdavej. The Aux. antenna wire is a little tight but it makes it ok.


Ron

What modified BIOS are you running? Getting an "N" card to work on the TC1100 would be great.

Thanks,
Ron

Glad to here you got it working. I am sorry I did not respond earlier but was not on the computer for over a week.

Ron

If you need a light in the system tray that shows when the hard drive is working I use this program on my HP TC1100. Just have the program run at start up and it works great.
...

Try to reinstall this button driver. ...

Not wasting my time. i like helping out if I can. Before redoing the driver maybe take out the wifi card and reboot. Then shut down and install the card and boot up and load the driver.

If it is there you might have to reinstall the driver for the wireless card.
Does that model have the Qmenu program?

If you are giving up on it pm me and let me know if you would sell it and for how much.
Is the battery still good?
Also I found something else. According to this spec sheet it might only be good up...

This is from the link I had in the other post. I think the bootable cd or usb thumb drive can be made on another windows system computer. Then put it in the 4400 and set the bios to boot from the cd...

Are you able to get into the bios? Also there is usually a program that you would run from boot up that flashes the newest bios. That system was built after the TC1100 so I think it should take...

I know how it can really be frustrating sometime. As of now I am having similar problems loading Win 7 on a fully cleaned hard drive in one of my desktop units. I can install Win XP fine but when I...

Not sure but HIDusb.sys has to do with the usb driver I think.
When you install from the windows xp cd are you booting to the external cd so it starts booting right from the windows set up cd? Are...

docg, Did you pm me? I thought I saw a pm but lost it somehow when I was check from my touchpad tablet.

How did you restore the operating system on your TC4400? I think you might have to start...

Docg is right, If I remember right it is the button driver that controls all of that.
...

If you do try it while it is apart, I know this sounds weird but try also pushing down on the heat shield above the North bridge chip. It just might have something to do with the heat and the shield...

I don't know if this will help you or not but I took a picture of an old board that I have. The North bridge chip that the arrow is pointing to is just to the bottom of where the tape is. The second...

I did not mean to sound like it was definitely the fan, Just that that would be the most cost effective way to go for your first try. I can't see any other place where a noise could come from in that...

Sounds like your fan to me also. It would be the cheapest place to start. Remember if you change it to use new thermal past on the top of the CPU. This is what you would look for on ebay.

11101111

Here are a few drivers that I found that I needed when I installed Windows 7.

The video driver here....

That is the known graphics problem that the TC1100's have. I did fix one with the re-flow fix. I used a heat gun on the graphics chip inside. You have to be very careful not to get it too hot or move...

Glad to here that everything worked out OK. Good luck with the sale.

Ron

Try these. Under Driver and Network....

HP looking into Windows 8 Tablet.

http://www.pcmag.com/article2/0,2817,2394816,00.asp#fbid=_xSKTTTO0IW

Ron

Just wondering if any tablet friends have a HP Touchpad? I picked up a 32 gig unit last week and it does not seem to be to bad. Would be a little better if it had a regular USB port but so far it is...